New from ReVtech are 2 new Li-Po receiver packs designed especially for Nitro vehicles. Made with the highest quality cells, covered in extra heavy duty shrink and sporting 20awg leads, you will not find a better or more dependable receiver pack anywhere. Super light weight and designed to power the electronics of 1/10th & 1/8th scale gas powered race cars, as well as boats and some planes.

Racers have asked us for Li-Po packs vs the Li-Fe so they have the higher voltage that some radio systems will allow you to run, providing higher torque and faster operating servos. This is a big advantage with the new heavier 1/10th and 1/8th vehicles. Each pack is kevlar wrapped and covered in heavy duty orange shrink. The packs have universal plug for operation as well as a balance plug.

Li-Po receiver packs produce more power then Li-Fe so there is a big advantage using these both when your radio system allows full use of 7.2 volts and when used on a system that restricts voltage with a voltage regulator the voltage will stay high and your servos fast for longer runs.

You will need a Li-Po specific charger to charge the pack (NiMH or Ni-CD only chargers WILL NOT WORK!)

You must not over discharge the Li-Poly battery pack. Be sure to ready your chargers instruction for the correct settings.

Specs:

• Capacity: 2500mAh

• Nominal voltage: 7.4v

• Li-Po cell arrangement: REV2105 2S1P, REV2106 2S2P

• Discharge: 9C continuous, 18C max 

• Dimension: REV2106 31 x 32 x 55mm 94 Gr. approx.

• Connector: JR style with 20AWG Silicone Wire

• Recommended For: 1/10th & 1/8th scale vehicles, boats, helicopters & planes